|
Open GL Setup for the Cube Example Program
|
|
The Cube example program requires that OpenGL be enabled. Follow the procedure below
to complete this process. |
cd /opt/vc/src/hello_pi |
Run ./rebuild.sh this runs through all of the hello_example programs building each example. |
cd hello_triangle |
Run ./hello_triangle.bin This confirms open GL has been installed correctly |
Run sudo raspi-config and select advanced options |
|
Select memory split. |
|
Set GPU memory to 128MB. |
|
Reboot and then you should then be able to run the Cube example. |
|
|
|
© The BlackBoxCameraTM Company Limited
2019
|
|